Miniature Fluxgate Magnetometer WFG-120

Order-No: WFG-120-100   Series/Model: WFG-120

Miniature Fluxgate Magnetometer WFG-120
Click to enlarge

Miniature Fluxgate Magnetometer System

Main Product Features

  • Complete 3-axis system
  • Low noise level: <3x10-6 G RMS/Hzœ
  • Measure fields op to 1 Gauss
  • Low temperature coefficent
  • Compact size: 0.725/" x
  • Operates from ±5 VDC or ±7 to ±12VDC at ± 20 mA
  • Rugged construction

The Model WFG-120 System is a complete 3 axis fluxgate magnetometer packaged in a rectangular/parallelpiped package of dimensions 0.75\" x 0.75\" x 2.75\". The package corners are rounded to enable the unit to fit inside a 1.0\" diameter cylinder. The system operates from one of two optional input voltages: regulated ±5 VDC or unregulated ±7 to ±12VDC and consumes a total power of 200 mW.

The Fluxgate Magenetometer Model WFG-120 provides 3 analog output voltages proportional to the magnetic field magnitude in three orthogonal directions. Full scale output is ±4.0 volts; this voltage represents a magnetic field of ±1.00 Gauss. Output scale factor is adjusted to an accuracy of +0.1%. The system noise level is <3x10-6G RMS/Hzœ.

As a magnetic compass, the Fluxgate Magenetometer Model WFG-120 can provide direction accuracy to better than 0.1º. Some applications combine the Model WFG-120 with a precision 3 axis accelerometer to provide roll, pitch and yaw angles accurate to 0.1º. In magnetic anomaly detection situations, the low noise level of the Model WFG-120 enables very small magnetic signatures to be measured. This enables signal detection at a large distance from the anomaly being measured. Range to the anomaly can be measured by using several Model WFG-120\'s to record both field and field gradient. Range is proportional to the quotient of these quantities.

A calibration sheet is provided with each unit giving data on zeros, scale factors and orthogonality constants for each axis. This data enables external correction of the output voltages to increase overall system accuracy.

Connection to the system is accomplished by means of six #26 gauge Teflon insulated wires with a nominal length of 6\".

Applications

  • Package inspection
  • Classroom demonstration
  • Residual field meausrements (shielding effectiveness)
  • Solenoid/Helmholtz coil calibration
  • Field Mapping
  • Vehicle magnetic signature measurements
  • Measure Earth´s field vector components
  • Magnetic environment monitoring
  • Measure weak fields in rocks
  • Fluxgate compass systems
  • Masurement of magnetic signatures
  • Magnetic fuses
  • Measurement of magnetic fields generated by power lines
Acrobat-Reader-Logo

Opening the Download-Files May require the Adobe-Acrobat-Reader.
Click here to download the Adobe-Acrobat-Reader.


-------------------------------------------------------------------------------------------------------------

If you have questions please don't hesitate to contact us any time.

By: Phone +49 (89) 3133007, Fax +49 (89) 3146706, wuntronic@wuntronic.de or send us our Contact form

Wuntronic GmbH, Heppstrasse 30, D-80995 Munich, Germany